30HP Water Cooled Cased Industrial Chiller

• Customization: Available
• After-sales Service: Engineers Available to Service Machinery Oversea
• Warranty: Two Years
• Model NO.: XC-30WCI
• Type: Water-Cooled
• Cooling Method: Water-cooled
• Unit Structure: Split
• Selected Voltage: 380V/50HZ
• Compressor Number: 2
• Noise Level: Low
• Application Fields: Plastic
• Certification: ISO, CE
• Condition: New
• Refrigerant: R22/R407c
• Compressor Power: 26.8kw
• Max Pressure: 50m
• Transport Package: Wooden Package
• Specification: 210*110*130 cm
• Trademark: G-PLAS
• Origin: Ningbo
• HS Code: 8419899090
• Production Capacity: 5000

Product Description

Product Description

 

 

Product Description
XC-WCI series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.

Features:
Compressor is used "COPELAND" brand which made in the USA. The inside safety protection can guarantee the long lasting of the chiller well. The pump is used made in Taiwan and all parts of cooling system are imported from the USA, Mexico. Denmark and Japan.
Equipped with shellpipe condenser and stainless steel cased evaporator, which are quite easy to be cleaned and maintained. Equipped with automatic water supply device in the water- tank. Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.
Larger than model XC-20 are assembled 2 sets or 4 sets of compressors, so they are able to used as separate or together to reduce the resource waste.
Complete with safety protection and error indication system, including compressor over load protection, pump over load protection, high pressure and low pressure protection and phase failure protection.
Equipped with figure intellectualized temperature controls, which can accurately measure and control water temperature within the range of 5C-35C.
Applied Machinery: Cooling system of oil temperature, ultrasonic, high frequency machinery. Cooling
System of injection molding machinery. Cooling system of blow molding machinery. Cooling system of extruder.
Additional equipment for option: 1. Starter of timer switch. 2. Large type of water filter. 3. Protection switch for prove the electric leakage. 4. Cooling tower and pump.

Model	XC-03WCI		XC-05WCI	XC-08WCI	XC-10WCI			XC-12WCI	XC-15WCI		XC-20WCI	XC-25WCI	XC-30WCI		XC-40WCI	XC-50WCI	XC-100WCI
Parameter
Specifications
Cooling  capacity  (Kcal/h)	7580		13500	21150	28000			34400	41000		50000	60000	77600		101780	121400	246000
Compressor	( All-closed  V orticity )																Screw  Compressor
Compressor  power  (kw)	2.5	4.4		7	9	10.2			13.4	18		20.4	26.8		35	40	74
Refrigerant	R22 / R407c
Chilled  water  pump  power(kw)	0.37	0.75		0.75	1.5		1.5		2.2	2.2		2.2		4	7.5	7.5	8
Max  flow  rate  of  chilled  water(L/min)	90	115		115	217		217		315	315		315		400	600	600	900
Max  pressure(m)	22	28		28	25		25		25	26		26		50	55	55	60
Flow  water  inlet  and  outlet  pipe    ( " )	1 "	1.5 "		1.5 "	1.5 "		1.5 "		1.5 "	1.5 "		1.5 "		2.5 "	3 "	3 "	5 "
Condensing  water  rate  (L/min)	≥ 36	≥ 60		≥ 100	≥ 135		≥ 200		≥ 200	≥ 240		≥ 300		≥ 300	≥ 340	≥ 400	≥ 800
Chilled  water  inlet  and  outlet  pipe  (" )	1 "	1 "		1.5 "	1.5 "		1.5 "		1.5 "	2 "		2 "		2 "	2 "	2 "	4 "
Size  length(mm)	850	850		1000	1150		1250		1500	1700		1700		2100	2100	2300	2500
Size  width(mm)	560	560		750	800		850		900	950		1000		1100	1200	1400	1500
Size  height  (mm)	870	1040		1100	1150		1050		1200	1200		1300		1300	1500	1500	1700
Water  tank  capa(L)	38	70		130	170		220		260	300		380		/
Weight(kg)	180	220		320	400		420		450	550		650		750	860	1200	2200

 

Book a Factory Tour